Stanozolol Winny Oil Injectable Winstrol , Cas 10418 03 8 Muscle Building Steroid 50mg/ml
50ml
MOQ
Negotiable
Price
Stanozolol Winny Oil Injectable Winstrol , Cas 10418 03 8 Muscle Building Steroid 50mg/ml
Features Gallery Product Description Request A Quote
Features
Basic Infomation
Place of Origin: China
Brand Name: YW
Certification: GMP, ISO9001, USP, KOSHER
Model Number: 10418-03-8
High Light:

muscle building steroid oil

,

pharmaceutical raw materials

Payment & Shipping Terms
Packaging Details: Discreet disguised package or as required
Delivery Time: 3~7 working days
Payment Terms: Western Union, Moneygram, Bitcoin and Bank Wire Transfer
Supply Ability: 5000L/week
Specifications
Strength: 50mg/ml
Appearance: Yellow Oil
Usage: Muscle Building Steroid
CAS Number: 10418-03-8
Application: Injectable
Recipe: Winstrol Powder,BA, BB, EO, Guaiacol
Email: Sinosource6666@gmail.com
Whatsapp: +86-13657291547
Wickr: Sinosource
Product Description

Yellow Oil Injectable Winstrol, 50mg/ml Stanozolol CAS: 10418-03-8 Winny Muscle Building Steroid

 

Winstrol 50mg/ml Oil Based Description:

 

Winstrol counteracts estrogenic side effects such as gyno and water retention - another quality which makes it attractive to the athlete seeking lean mass gains. Winstrol is a 5-alpha reduced substrate. 5-alpha reduction breaks the double bond between positions 4 and 5, which is what is required for aromatase to convert to estrogen. Aromatase is the primary enzyme used for the manufacturing of estrogen within the male body. For avoiding gyno, Winstrol is well suited.

 

Winsrol basic information:

 

Names: Winstrol, Stanozolol, Winny
Strength: 50mg/ml oil based
Application: Injectable
Appearance: Yellow oil
Dosage: 25-50 mg per day

Stanozolol / Winstrol for Bulking and Cutting:

To gain muscle mass (bulking), Winstrol is best combined with a stronger androgen, such as Testosterone. This will give the cycle a good anabolic effect while minimizing estrogenic activity. This results in excellent increases in lean muscle mass, as opposed to the more common bulking cycle which greatly increases muscle mass while also increasing water retention and some gains in fat.

To lose fat (cutting), Winstrol is best combined with a non-aromatizing androgen such as Trenbolone or Halotestin. This combination can create a strongly defined, hard look. This is a very attractive look sought out by many bodybuilders.
Women should take around 5-10 mg daily for the recommended length of time of 4-6 week.

 

COA

 

Product name Nandrolone decanoate
Appearance White powder
Absorbance ≤0.30% Conform
Specific Rotation +39°~ +43° +40.2°
Chromatography Purity Conform Conform
17α-Isomer ≤0.50% 0.38%
Organic Volatile Impurities Conform Conform
Loss On Drying ≤0.50% 0.27%
Residue On Ignition ≤0.10% 0.015%
Assay 97~101% 99.5%

 

 

How to Make Injectable Winstrol in Oil


1 Gram winstrol
1 20 ml glass vial or larger
1 20 ml sterile glass vial or larger
1 .45 Whatman sterile syringe filter.
2 5 or 10 ml syringes
2 3 ml syringes
3 18 or 20 gauge pins
2 22 gauge pins

17 ml of sesame seed oil
2 ml of benzyl alcohol
2 ml of guaiacol (super solvent)

This will make 20ml at 50mg/ml.
Tip: Only try to convert winstrol powder 1 gram at a time, it is very easy to ruin it in the conversion
A big thanks goes to basskiller for all his help

 

Step 1 Weigh out 1 gram of winstrol powder, you will need a scale
use the tare function to take away the weight of the container that holds your powder, and weigh it out to 1 gram.
Step 2
Draw out 2 ml of the super solvent, using 1 of the 3 ml syringes.
Step Place the powder in the open glass vial, then add the super solvent to the powder in the vial
Step 4 A:
Place back on rubber stopper, put one of the 20g pins in the stopper. Place the vial in a small pan, and place on eye of the stove (you can do this step in the oven, but I have found this method works better). Cut on heat, heat until powder disolves into a liquid (the melting point of winstrol is between 239.8-242 degrees F). Turn off heat, and let it cool down still in the pan, until it reaches room temp. again takes about 15 minutes.
Vial will be VERY HOT, so use an oven mit.
B:
Also heat seseame oil (heat more than 17ml because you won't get it all out) it can be heated on a stove eye, or in the oven, I heated mine in the oven in a muffin pan, the oil needs to reach 212 F., to help sterilize the oil. I put mine in the oven at 275 F. Just to make sure.
Step 5 Draw out .2 ml of benzyl alcohol, this is 1% of the final solution. It is very important that you do not use more than 1% of the solution with winstrol, or it could crash when finished.
Step 6 Add BA to the solution in the vial. Shake very gently.
Step 7

Draw out the oil with the 10 ml syringe, (Be sure you have allowed it to cool down some) add the 15ml of oil to the solution. Shake very gently again.

Note - After adding the oil to the solution the winstrol may begin to clump up back into a powder, if it does, you just need to reheat it again like in Step 4a, remember to let it cool slowly. My powder did this, and this took care of it.

Step 8 Save 2 ml of oil in the syringe, and re-cap it. You need this later during the sterile filter process to make sure none of the winstrol is left in the filter.
Step 9 Place 1 of the 18 guage pins in the steile unopened vial, and attach the whatman sterile filter.
Draw out the solution using the other 10ml syringe, attach to the filter, and slowly press solution into the sterile vial.
Then use the remainding 2ml of oil in the other syringe, to run through the filter, to make sure that none of the winstrol is left in the filter.
Step 10 After filtering, leave the pin in the sterile vial, remove the filter. Place the vial in a small pan, and place on eye of the stove (you can do this step in the oven, but I have found this method works better). Cut on heat, heat solution for about 15 to 20 minutes. Turn off heat, and let it cool down still in the pan, until it reaches room temp. again this takes about 15 minutes.

 

Winstrol 50mg/ml Dosage:

 

The normal dosage for men is between 25-50 mg per day for the injectable version of Stanozlol. Stanozlol is often combined with other steroids depending on what the personal goals of the athlete are. To gain muscle mass (bulking) Stanozlol is best combined with a stronger androgen such as Testosterone. This will give the cycle a good anabolic effect while minimizing estrogenic activity. This results in excellent increases in lean muscle mass, as opposed to the more common bulking cycle which greatly increases muscle mass while also increasing water retention and some gains in fat. To lose fat (cutting), Stanozlol is best combined with a non-aromatizing androgen such as Trenbolone or Halotestin. This combination can create a strongly defined, hard look. This is a very attractive look sought out by many bodybuilders.

 

 

 

Our Advantage:

 

Rich experience Our company have a history of over 10 years and branch offices all around China.
Top quality All products are carefully tested and most of the purity can up to 99%, COA is available.
Competitive price We are the manufacture, so we have the most competitive price.
Safe packing Discreet package will be applied, or as you required.
Safe customs clearance Our customs clearance pass rate is above 99%.
Fast delivery We will delivery your parcel within 24 hours after payment.
Warm after service You can Contact us any time, we will try our best to offer you the best service.

 

Other Hot Selling Products:
Injection Liquid: steroids and pepetides
Dianabol 50 50mg/ml Testosterone Acetate Nandrolone phenylpropionate
Anadrol 50 50mg/ml Testosterone Cypionate Nandrolone cypionate
Anavar 50 50mg/ml Testosterone Decanoate Drostanolone Propionate
Deca 200 200mg/ml Testosterone Enanthate Drostanolone Enanthate
Deca 250 250mg/ml Testosterone Isocaproate Tadalafil
Npp 200 200mg/ml Testosterone phenylpropionate Vardenafil
200(BC) 200mg/ml Trenbolone Acetate Dianabol
300(BU) 300mg/ml Trenbolone Enanthate Tamoxifen Citrate
Cypoject 250(TC) 250mg/ml Nandrolone Decanoate hydrochloride
Enanject 250(TE) 250mg/ml Boldenone undecylenate MGF
Enanject 500(TE) 500mg/ml Boldenone Cypionate PEG MGF
Propionat 100(TP) 100mg/ml Testosterone Propionate CJC-1295 DAC
Propionat 200(TP) 200mg/ml Testosterone Undecanoate HCG
sustanon 250 250mg/ml Mesterone PT-141
sustanon 300 300mg/ml Testosterone Sustanon 250 Melanotan-2
trenabolic 100 100mg/ml Boldenone Propionate GHRP-6
trenabolic 200 200mg/ml Methylandrostanolone Hexarelin
Trenaject 60(TE) 60mg/ml Methenolone Enanthate Sermorelin
Trenaject 100 100mg/ml Methenolone Acetate TB500
Trenaject 150 150mg/ml Anadrol Tesamorelin
Trenaject 200 200mg/ml Anavar Gonadorelin
Parabolone 50(THC) 50mg/ml Winstrol DSIP
Masteron 100(DP) 100mg/ml Clomifene citrate Selank
Masteron 200(DE) 200mg/ml Toremifene citrate IGF-1
Primoject 100(ME) 100mg/ml Nandrolone undecylate HGH

 

 

Stanozolol Winny Oil Injectable Winstrol , Cas 10418 03 8 Muscle Building Steroid 50mg/ml 0

 

 

If you have any questions, please feel free to contact me:

Email: sinosource6666@gmail.com

Whatsapp: +86-13657291547

 

Recommended Products
Get in touch with us
Contact Person : Ben
Tel : Wickr: sinosource
Characters Remaining(20/3000)