2mg/vial High Purity Freeze-Dried White Powder Peptides Hormones PEG-MGF For Muscle Gaining
Product Description:
Mechano Growth Factor (MGF) also known as IGF-1Ec is a grow factor/repair factor that is derived from exercised or damaged muscle tissue, Its called MGF as IGF-1Ec is a bit of a mouthful and harder to identify amongst the other igf variants.What makes MGF special is its unique role in muscle growth. MGF has the ability to cause wasted tissue to grow and improve itself by activating muscle stem cells and increasing the upregulation of protein synthesis, this unique ability can rapidly improve recovery and speed up muscle growth.
MGF (mechano growth factor) has been used by bodybuilders and athletes for a few years already. After resistance exercise,IGF-1 is released within the muscle. Specifically, at this time, immediately following the mechanical use of a muscle, the IGF-I gene is spliced towards MGF which initiates hypertrophy and repair of local muscle damage. It does so both by activating muscle stem cells and satellite cells, but also via various other anabolic processes. It differs from "regular" IGF-1 mainly due to it's C-Terminal sequence.
MGF Peptide is a much commonly used abbreviation for "Mechano Grow Factor" peptide which is a very popular exercise supplement used by body builders & athletes. The biomolecule was first discovered & documented by a well known biochemist called Goldspink. It is also known as "I-G-F-1EC"and is derived from damaged or worn out tissue. The peptide molecule is known to initiate repair of damaged tissues or local muscles and is released into the body after extensive training, resistance exercise etc. However, one should note that the peptide is chemically different from commonly found "I-GF-1" due to the existence of a C Terminal Sequence.
Quick Detail :
PEG-MGF
Alias: PEG-Suc-YQPPSTNKNTKSQ(d)R(d)RKGSTFEEHK-NH2; PEG-Suc-Tyr-Gln-PRO-PRO-Ser-Thr-Asn-Thr-Lys-Ser-Gln-D-Arg-Lys-Gly-Ser-Thr-Phe-Glu-Glu-His-Lys-NH2
M.F.: C121H200N42O39
Purity (HPLC): 97.0%
Packing: 2mg/vial,10vials/kit
Appearance: White powder
Storage :Lyophilized Peg MGF is stable at room temperature for 90 days,however it should be stored
in a freezer below -8C for any extended period of time. After reconstituting Peg MGF should be
refrigerated at temperatures not to exceed 36 F.
Usage: Peptides for use of pharmaceutical intermediates .
COA :
| Appearance |
White to off white powder |
Consistent |
| Purity(HPLC) |
≥95% |
97.30% |
| Water |
<6.0% |
5.60% |
| Acetic Acid |
3.0-8.0% |
6.45% |
| Trifluoroacetic Acid |
<0.25% |
0.12% |
| Peptide |
≥80% |
83.45% |
| MS |
Consistent |
Consistent |
Product Application:
It was first discovered in the muscle by Goldspink, et al. In human muscle, a 49-base insert changes the reading frame in mechano grow factor (MGF) as compared to IGF-1.When mechanical overload is introduced to a muscle (as by weight training), the IGF-1 gene released and is differentially spliced during the bodies response. Initially, it it is spliced to produce predominantly IGF-1Ec (called the MGF splice variant of IGF-1). This early splicing stimulates satellite cells into activation. Which in turn allows the activation of extra undamaged nuclei to grow new muscle fiber and tissue.
The appearance of MGF also initiates the upregulation of new protein synthesis. After this initial splicing of IGF-1 into MGF, production then switches towards producing a systemic release of IGF-1Ea from the liver, which also upregulates protein synthesis as well. The expression of IGF-1 splice variants, over the course of the healing and regrowth phase of muscle repair is thought to be the primary anabolic mechanism by which the body produces new muscle. MGF is available as an injectable peptide, and it has been anecdotally shown that injecting it will cause a response in the area resulting in localized muscle growth.
MGF (mechano growth factor) has been used by bodybuilders and athletes for a few years already. After resistance exercise,IGF-1 is released within the muscle. Specifically, at this time, immediately following the mechanical use of a muscle, the IGF-I gene is spliced towards MGF which initiates hypertrophy and repair of local muscle damage. It does so both by activating muscle stem cells and satellite cells, but also via various other anabolic processes. It differs from "regular" IGF-1 mainly due to it's C-Terminal sequence. MGF can initiate muscle satellite (stem) cell activation in addition to its IGF-Ireceptor domain which ithen in turn increases protein synthesis turnover, and therefore can if used correctly improve muscle mass over time.
HOW TO USE MGF
When you train, what happens to your muscles is they break down, the cells are damaged, muscle tissue needs to be repaired and your body produces 2 forms of MGF splice variant. The first initial release of the above mentioned number 1 variant from the liver helps muscle cell recovery, if there is no MGF then muscle cells die.
As muscle is a post-mitotic tissue and as such cell replacement is not a means of tissue repair, if the cells are not repaired they die and your muscles get smaller and weaker. In muscle tissue, the pool of these stem cells is apparently replenished by the action of MGF, which is produced as a pulse following damage.
Now, with synthetic injections of MGF you can increase the pulse and so speed up recovery, and increase the muscle tissue cells by stimulating satellite cells into full maturity. In terms of dosages, 200mcg bi-laterally is the very best choice of dosing in muscles trained.
The only problem with MGF, and this is the reason I don't like it, is that it has such a short half life, just a few minutes, between 5-7, and it needs to be used immediately post workout as it wont work if muscle tissue hasn’t been damaged. That's why, for me personally, I think the best option is PEG MGF.
Nevertheless, MGF has a huge role to play, and is administered to those with muscle wasting diseases and for those who are elderly and have lost muscle mass for good reason, it is EXTREMELY anabolic.
MGF Dosage
A typical protocol would be:
100-300mcg of MGF divided into 1-2 bilateral administrations in 2-5 different areas of the muscles approximately 5-7 days a week - intramuscular injections.
Example, if you want to administer 200mcg of MGF into the chest and biceps muscles 2 times a day and 3 different areas of the muscle then you would need to divided the dose as follows:
200mcg / 2 times per day = 100mcg per administration
100mcg per administration / 4 muscles (2 chest and 2 bicep muscles) = 25mcg per muscle
25mcg per muscle / 3 different locations on each muscle = 8.3mcg per injection
Theoreticall, the more locations used to administer the MGF into the muscle the more places for muscle growth.
Related products :
| Product Name |
CAS No. |
| Testosterone Series |
| Testosterone Enanthate |
CAS 315-37-7 |
| Testosterone Base |
CAS 58-22-0 |
| Testosterone Acetate |
CAS 1045-69-8 |
| Testosterone Propionate |
CAS 57-85-2 |
| Testosterone Cypionate |
CAS 58-20-8 |
| Testosterone phenylpropionate |
CAS 1255-49-8 |
| Testosterone Isocaproate |
CAS 15262-86-9 |
| Testosterone Decanoate |
CAS 5721-91-5 |
| Testosterone Sustanon 250 |
/ |
| Testosterone Undecanoate |
CAS 5949-44-0 |
| Fluoxymesterone (Halotestin) |
CAS 76-43-7 |
| 17-Methyltestosterone |
CAS 58-18-4 |
| Mestanolone |
CAS 521-11-9 |
| Mesterolone (Proviron) |
CAS 1424-00-6 |
| Oral Turinabol |
CAS 2446-23-3 |
| 17a-Methyl-1-testosterone |
CAS 65-04-3 |
| Clostebol acetate (Turinabol) |
CAS 855-19-6 |
| 1-Testosterone Cypiontae |
CAS 1965-6-5 |
| Nandrolone Series |
| Nandrolone |
CAS 434-22-0 |
| Nandrolone Decanoate (DECA) |
CAS 360-70-3 |
| Nandrolone Phenypropionate (Durabolin) |
CAS 62-90-8 |
| Stanolone(Androstanolone) |
CAS 521-18-6 |
| Mibolerone |
CAS 3704-09-4 |
| Nandrolone Propionate |
CAS 7207-92-3 |
| Nandrolone Cypionate |
CAS 601-63-8 |
| Trenbolone Series |
| Trenbolone Acetate (Finaplix H/Revalor-H) |
CAS 10161-34-9 |
| Trenbolone Enanthate |
CAS 10161-33-8 |
| Metribolone (Methyltrienolone) |
CAS 965-93-5 |
| Trenbolone Hexahydrobenzyl Carbonate (parabolan) |
CAS 23454-33-3 |
| Trenbolone Base |
CAS 10161-33-8 |
| Tibolone |
CAS 5630-53-5 |
| Boldenone Series |
| Boldenone Base |
CAS 846-48-0 |
| Boldenone Undecylenate (Equipoise) |
CAS 13103-34-9 |
| Boldenone Acetate |
CAS 2363-59-9 |
| Boldenone Cypionate |
CAS 106505-90-2 |
| Oral Steroids |
| Oxymetholone (Anadrol) |
CAS 434-07-1 |
| Oxandrolone (Anavar) |
CAS 53-39-4 |
| Stanozolol (Winstrol) |
CAS 10418-03-8 |
| Stanozolol (Winstrol) Micro Powder |
CAS 10418-03-8 |
| Dianabol (Metandienone) |
CAS 72-63-9 |
| Drostanolone Series |
| Drostanolone Propionate (Masteron) |
CAS 521-12-0 |
| Drostanolone Enanthate |
CAS 472-61-1 |
| Methasterone(Superdrol) |
CAS 3381-88-2 |
| Methenolone Series |
| Methenolone Enanthate |
CAS 303-42-4 |
| Methenolone Acetate/Primobolan |
CAS 434-05-9 |
| Anti-Estrogen Steroids |
| Tamoxifen |
CAS 10540-29-1 |
| Tamoxifen Citrate (Nolvadex) |
CAS 54965-24-1 |
| Clomiphene citrate |
CAS 50-41-9 |
| Toremifene citrate |
CAS 89778-27-8 |
| Exemestane(Aromasin) |
CAS 107868-30-4 |
| Formestane |
CAS 566-48-3 |
| Anastrozole (Arimidex) |
CAS 120511-73-1 |
| Letrazole(Femara) |
CAS 112809-51-5 |
| Sex Enhancement |
| Cialis (Tadalafil) |
CAS 171596-29-5 |
| Sildenafil Citrate() |
CAS 171599-83-0 |
| Sildenafil Mesylate |
/ |
| Vardenafil hydrochloride (Levitra) |
CAS 224785-91-5 |
| HCL |
CAS 119356-77-3 |
| Dutasteride (Avodart) |
CAS 164656-23-9 |
| Finasteride |
CAS 98319-26-7 |
| Yohimbine HCL |
CAS 65-19-0 |
| Solvents for Steroids |
| Benzyl Benzoate |
CAS 120-51-4 |
| Benzyl Alcohol |
CAS 100-51-6 |
| Grape Seed Oil |
CAS 85594-37-2 |
| Ethyl Oleate |
CAS 111-62-6 |
| Guaiacol |
CAS 90-05-1 |
| Polysorbate 80 (Tween 80) |
CAS 9005-65-6 |
| Polyethylene Glycol (PEG) |
CAS 25322-68-3 |
| Propylene Glycol |
CAS 57-55-6 |
| MCT Oil |
|
| SARM Series |
| MK-2866(Ostarine,Enobosarm) |
CAS 841205-47-8 |
| GW501516(GSK-516,Cardarine) |
CAS 317318-70-0 |
| MK-677 (Ibutamoren) |
CAS 159634-47-6 |
| S-4 (Andarine,GTX-007) |
CAS401900-40-1 |
| LGD-4033 |
CAS1165910-22-4 |
| SR9009 |
CAS1379686-30-2 |
| SR9011 |
CAS1379686-29-9 |
| YK-11 |
CAS431579-34-9 |
| RAD140 |
CAS1182367-47-0 |
| AICAR (Acadesine) |
CAS 2627-69-2 |
| Polypeptide Hormones |
| CJC1295 without DAC |
CAS 863288-34-0 |
| CJC1295 with DAC |
CAS 863288-34-0 |
| Hexarelin |
CAS 140703-51-1 |
| MGF |
|
| PEG MGF |
|
| MT-1 |
CAS 75921-69-6 |
| MT-2 |
CAS 121062-08-6 |
| GHRP-2 |
CAS 158861-67-7 |
| GHRP-6 |
CAS 87616-84-0 |
| Ipamorelin |
CAS 170851-70-4 |
| Sermorelin |
CAS 86168-78-7 |
| Oxytocin |
CAS 50-56-6 |
| TB500 |
CAS 77591-33-4 |
| Pentadecapeptide BPC 157 |
|
Advantage:
1. Rich experience.
We specialize in this field for many years, our steroids and hormones exported to Overseas, to Europe, Africa, Asia and Americas and so on other country, and we have got very good feedback from our customers, and had Established long friendly relations of cooperation.
2. Great quality, purity and favourable.
Good quality is one of our secret success, welcome order the samples, MOQ just 10 grams.
3. Safest and fastest delivery.
We have Adequate stock, and can delivery quickly at the very day when receive the payment.
We have special way could ship 0.01 kilo to 3.5 kilo products a time. We offer melting powder into liquid service. And ship the liquid in special bottles.
4. Good after-sales service.
Tell the package update ASAP, and will try best solve when customer encountered various.
If you have any questions, please feel free to contact me:
Email: sinosource6666@gmail.com
Whatsapp: +86-13657291547
