Payment & Shipping Terms:
legal muscle building steroids,
trenbolone enanthate powder
Very hot Products 1,4- Butanediol in Australia , Organic Solvent Pharmaceutical Grade colorless viscous oil-like liquid CAS 110-63-4
Grade: Pharmaceutical Grade
Appearance: Colorless Liquid
Delivery Time:3-7days after payment
Packing 25kg/ plastic barrel
BDO is the short name of 1,4-Butanediol, it is a kind of colorless viscous oil-like liquid, combustible and can mixing with water. With freezing point of 20.1 Degree C, boiling point of 228 Degree C,171 Degree C(13.3kPa),120 Degree C(1.33kPa),86 Degree C(0.133kPa, the relative density of 1.0171(20/4 Degree C). The index of refraction is 1.461, flash point is 121 Degree C. It can soluble in methanol and ethanol, slightly soluble in ether. It has bitter taste and moisture absorption.
General Description: Odorless colorless liquid or solid (depending upon temperature).
Usage:1,4-Butanediol is used in the synthesis of epothilones, a new class of cancer drugs. Also used in the stereoselective synthesis of (-)-Brevisamide.
Air & Water Reactions:Highly flammable. 1,4-Butanediol is hygroscopic. Water soluble.
Reactivity Profile:1,4-Butanediol is heat and light sensitive. 1,4-Butanediol reacts with acid chlorides, acid anhydrides and chloroformates. 1,4-Butanediol also reacts with oxidizing agents and reducing agents. 1,4-Butanediol is incompatible with isocyanates and acids. 1,4-Butanediol is also incompatible with peroxides, perchloric acid, sulfuric acid, hypochlorous acid, nitric acid, caustics, acetaldehyde, nitrogen peroxide and chlorine.
Health Hazard:Ingestion of large amounts needed to produce any symptoms.
It's an important raw materials of organic chemical and fine chemical, it is basic material in the production of polyethylene terephthalate (PBT) and PBT fiber plastic. It's the main raw material to produce tetrahydrofuran (THF). 1,4-Butanediol is a kind of important organic chemical and fine chemical raw material, 1,4-Butanediol is the basic raw material for producing polyethylene terephthalate (PBT) engineering plastics and PBT fiber, PBT plastic is one of the most promising five major engineering plastics.
1,4 butanediol is an important raw materials for organic and refined. It is the basic material for producing PBT plastics and fiber, and PBT is one of the five most promising engineering plastics. 1,4butanediol is the main raw material for producing THF, which is an important organic solvent. The polymeric compound PTMEG of THF forms the basic material for highly-elastic urethane elastic fiber, which is mainly used for producing high-grade sports wear and swimming suit that requir high elasticity. 1,4-butanediol is the main material for producing γ-butyrolacton, which is widely used in pesticide, pharmaceuticals, cosmetics and other industries due to its ability to produce 2-pyrrolidone, NMP and their derivatives NVP and PVP etc. high add-ons products. 1,4butanediol is the main material for producing polyurethane artificial leather, polyurethane, elastomer and polyurethane sole glue. polyurethane elastomer are widely used to manufacture elastic sole, auto solid fire, friction conveying belt and etc.
|Flash point (ºC)||111-120||115||Passed|
|Lgnition point (ºC)||361-383||377||Passed|
Toxicity and harm potential
1,4-Butanediol is not active in its own right; its mechanism of action stems from its identity as a prodrug of GHB, meaning that it is rapidly converted into GHB in the body.
GHB is considered to be a safe and non-toxic substance when used responsibly or medically. The LD50 is above the active dosage, and there is no danger of acute toxicity when this compound is taken at appropriate dosages. However, it can be dangerous when used as a recreational drug or abused. There have been many negative reports from recreational users who have overdosed, combined GHB with alcohol or other drugs, or accidentally dosed themselves unexpectedly.
One publication has investigated 226 deaths attributed to GHB.Seventy-one deaths (34%) were caused by GHB alone while the other deaths were from respiratory depression caused by interaction with alcohol or other drugs.To avoid a possible overdose of GHB/1,4-Butanediol, it is important to start with a low dose and work your way up slowly by increasing the dosage in small increments as the exact toxic dosage is unknown.
Accidental ingestions of 1,4-Butanediol have also occurred due to inadequate storage methods. If 1,4-Butanediol is put into a clear liquid, glass, or bottle, it can be easily mistaken for water. It is recommended to clearly label your 1,4-Butanediol in writing and dye the liquid with blue food coloring so it no longer resembles a drinkable beverage. It is also recommended to store your 1,4-Butanediol in a container that no one would drink out of.
It is strongly recommended that one use harm reduction practices when using this drug.
Legality of 1,4-Butanediol:
While 1,4-butanediol is not currently scheduled federally in the United States, a number of states have classified 1,4-butanediol as a controlled substance. Individuals have been prosecuted for 1,4-butanediol under the Federal Analog . A federal case in New York in 2002 ruled, but that decision was later overturned by the Second Circuit. However, a Federal District Court in Chicago ruled, and the Seventh Circuit Court of Appeals upheld that ruling. In the United Kingdom, 1,4-butanediol was scheduled in December 2009 as a Class C controlled substance. In Germany, the drug is not explicitly illegal, but might also be treated as illegal if used as a drug. It is controlled as a Schedule VI precursor in Canada.
Industrial Use of 1,4-Butanediol:
1,4-Butanediol is used industrially as a solvent and in the manufacture of some types of plastics, elastic fibers and polyurethanes. In organic chemistry. In the presence of phosphoric acid and high temperature, it dehydrates to the important solvent tetrahydrofuran. At about 200 °C in the presence of soluble ruthenium catalysts, the diol undergoes dehydrogenation to form butyrolactone.
World production of 1,4-butanediol was claimed to be about one million metric tons per year and market price is about 2,000 USD (1,600 EUR) per ton (2005). In 2013, worldwide production was claimed to be billions of lbs (consistent with approximately one million metric tons).
1. Rich experience.
Our company is a professional production leading factory in China in pharmaceutical area of many years, our products have exported to Germany, Spain, UK, USA, Australia, Middle East, and so on other country, and we have got very good feedback from our customers, we had Established long friendly relations of cooperation. High quality, best price!
2. Great quality, purity and favourable.
Good quality is one of our secret success, welcome order the samples, MOQ just 10 grams.
3. Safe and fast delivery.
We have warehouse in Australia, Canada and England, we have large amounts of stock in the warehouse, can ship to you directly from our foreign warehouse! So we can delivery quickly at the very day when receive the payment. And We offer melting powder into liquid service.
4. Good after-sales service.
Tell the package update ASAP, and will try best solve when customer encountered various problems.
Payment Methods:West Union,Moeny Gram, Bitcoin and Bank Transfer.
Delivery Ways:EMS,HKEMS,TNT,DHL,FedEX,UPS etc.
Shipment Time:Within 12-24 hours after confirmation of your payment
Other Service:Safe shipment,high purity and best price for you.
Shipping & Delivery
1.Packages are generally dispatched within approximately 24 days after receipt of payment.
2.After the each shipping we will provide you with:
1) a link & tracking number to track your package online.
2) the few pictures with your order & details.
3.About the Custom clearance,we packed in disguise ways.In our experience,the appropriate and safe delivery,there won't be problems.
4.Is it the best & safest shipping for all our repeat customers!
If you have any questions, pls feel free to contact me:
Email:email@example.com Whatsapp:+86-13657291547 Website: http://www.legalanabolic-steroids.com
Contact Person: Ben
Tel: Wickr: sinosource